MS & GI Hollow Pipes

MS & GI HOLLOW PIPES

Kavya Roofing  MS & GI Hollow Pipes are roll-formed from Hi-Tensile Galvanised / Hot Rolled steel. They are primarily used to provide lightweight, economical, efficient roofing and cladding support systems for framed structures.

Technical Specifications

Square Hollow Sections: This square hollow section has a completely normalized gain outline and uniform toughness with the cross section. This comes in two formed-cold and hot. It never goes through any weak spots and has high strength. Customers now can get it in the wide scale of steel grades like high strength grade which supplies extra flexibility in design.
Also, the high strength grades cover fine-grain steels, tempered and quench steels. This product meets the different wall thickness and
dimensions as well.

This hollow makes possible the blueprint of structural elements along with consistent external diameter under
different loads. It has highly carrying load features which in turn decrease corner radii. The hollows have an empty space which can be used
in industries effectively. Also, space can be utilized for transmitting electricity, water as well as air conditioning.

The available grades of this square hollow section such as EN, ASTM, GB, and JIS. The thickness of it is ranging from 2mm to 30mm and the length of it is from 6 m to 12 m. This meets almost all the international quality of standards and goes through different tests.

When the Cold Formed Square Hollow Section gets manufactured, it is well-packed. As the size of it is bigger, its cramming done in big wooden boxes to prevent from damaging and dusting during the last stage of production..

This Hot Finish or Cold formed Square Hollow Section is clearly marked as ISO with the assurance of traceability and it has technical support. This is basically made up of steel and relatively suitable for galvanizing. Now, talk about its sizes that are from 25 x 25m to 400 x 400m. Also, it is available in different lengths and weights as well have equal flanges and may be used in single spans and unlapped continuous spans in multi-bay buildings. Their freestanding stable shape allows easy handling and storage and is easily adapted for use in small and medium sized buildings as structural framework.

Standard: BS EN 10219 – Cold Formed Welded Structural Hollow Sections of Non-alloy and Fine Grain Steels

SHS (Square Hollow Sections) Sizes: 20*20mm-400*400mm
Wall Thickness: 0.5mm – 25mm
Length: 6000-14000 mm
Type: Seamless/ Welded / ERW
Dimensional Tolerances: Thickness : (All sizes +/- 10%)
Packing: In bundles, Anticorrosion heat preservation, Varnish coating, Ends can be bevelled or square cut, End Capped Certification & supplementary test, Finishing & Identity Mark
Available Grades: S235JRH, S275J0H, S275J2H, S355J0H, S355J2H, S355J2+N, IS 4923/ASTM A500/As Per Requirement
Surface Protection: Black (Self Coloured uncoated), Varnish/Oil Coating, Pre-Galvanized, Hot Dip Galvanized

Technical Specifications

Rectangular Hollow sections: The Cold Formed Rectangular Hollow Section pipe is used commonly as a structural section. These pipes are manufactured for giving up the weldability and greater strength. Its size is ranging from 50mm x 25mm to 450mm x 250mm. The wall thickness of it is ranging from 2mm to 20mm in greater sections. The grades that are easily available are S355 and S235. The standard specification of it is ASTM, ASME, DIN, JIS, and EN etc. To easily meet specifications needs of the buyer, these pipes are produced in different specification varying in thickness, size, standard etc on demand of buyers. Just place an order in bulk and get exactly what you want from a good seller, exporter, and supplier.

Standard: BS EN 10219 – Cold Formed Welded Structural Hollow Sections of Non-alloy and Fine Grain Steels

RHS Sizes: 40mm*20mm – 240*120mm
Wall Thickness: 1.6mm-16.0mm
Length: 6000-14000 mm
Type: Seamless/ Welded / ERW
Dimensional Tolerances: Thickness : (All sizes +/- 10%)
Packing: In bundles, Anticorrosion heat preservation, Varnish coating, Ends can be bevelled or rectangular cut, End Capped Certification & supplementary test, Finishing & Identity Mark
Available Grades: S235JRH, S275J0H, S275J2H, S355J0H, S355J2H, S355J2+N, IS 4923 / ASTM A500 / As Per Requirement
Surface Protection: Black (Self Coloured uncoated), Varnish/Oil Coating, Pre-Galvanized, Hot Dip Galvanized

Technical Specifications

Circular Hollow  sections: This hot form hollow section is easier to bend as compared to cold formed hollow sections. These hollow sections are used in designing of curved frames. These hot finished hollow sections products offer lighter, stronger and more amazing solutions combined with other enhanced aesthetic appeal.

The size of these hollow section pipes and tubes varies from 21.3mm and 508 mm. The thickness lies from 2.5mm to 20mm in the larger sections. The available grades of these hot form sections are S355J2H. There are many companies are avail online which offers hot finish circular hollow sections at standard lengths or they can cut length as according to your order. These hot finished hollow sections are designed mainly from fine grain steel for better performance. The product has yield strength 355 N/mm2 and allows higher fabrication factors and has lighter structure and it is cost saving material to invest in your any kind of structural and constructional projects.

The strength and weldable quality is good and is fully stress relieved with uniform mechanical properties. These hollow section pipes and tubes are used for critical applications where failure simply is not an option. This hot formed circular pipe is suitable for low-temperature applications and is the fully certified product. These are the few features and benefits of circular hollow section pipes.

Standard: BS EN 10210 – Hot Finished Structural Hollow Sections of Non-alloy and Fine Grain Steels
Sizes: 300 mm NB
Outer Diameter: 21.3 to 457.2mm
Wall Thickness: 1.8mm to 14.27mm
Length: 6000 to 12000/18000mm
Type: Seamless/ Welded / ERW
Dimensional Tolerances: Thickness : (All sizes +/- 10%)
Packing: In bundles, Anticorrosion heat preservation, Varnish coating, Ends can be bevelled or circular cut, End Capped Certification & supplementary test, Finishing & Identity Mark
Available Grades: S235JRH, S275J0H, S275J2H, S355J0H, S355J2H, S355J2+N, IS 4923 / ASTM A500 / As Per Requirement
Surface Protection: Black (Self Coloured uncoated), Varnish/Oil Coating, Pre-Galvanized, Hot Dip Galvanized